Springs are chosen for the door, not for the brand
When a spring breaks, the natural thought is to find another one like it. But the right replacement depends on the door it is lifting. A garage door spring is built with a specific wire thickness, coil length and diameter, and the combination is selected to counterbalance a particular weight. A spring that looks similar can have quite different strength.
Door weight varies far more than most people realize. A basic single steel door is much lighter than a double door with insulation, windows and decorative panels. A wood door can be heavy, and a door with glass or an added layer of insulation will weigh more than a plain one. Two doors of the same width can differ in weight enough to need different springs.
That is why technicians do not simply match the spring brand or color. They look at what the spring has to do. The aim is to choose a spring that counterbalances the door, so that the door feels light and stays in position when partly open. You can read how the spring works in our guide to torsion springs.
What counterbalance means in practice
A balanced door is one where the spring force and the door weight are nearly equal at most points of its travel. If you disconnect the opener and lift the door by hand to the middle, it should stay there, or drift very slowly. It should not slam down and it should not fly up. This is the standard a technician aims for.
If the spring is too weak, the door is heavy. It tends to fall when released partway, the opener has to do extra work, and the parts that carry the load, such as cables and drums, wear faster. If the spring is too strong, the door can rise on its own or shoot up with the opener, and the cables can go slack at the bottom of the travel, which can cause them to slip off the drums.
Neither extreme is good for the door. A balanced door puts the least strain on every part, from the opener motor to the track rollers. It is also safer, because a door that stays where it is put is less likely to fall on a person or a vehicle.
- Too weak: door feels heavy, falls when released, opener strains.
- Too strong: door rises by itself, cables can go slack and slip.
- Balanced: door stays put halfway and moves smoothly.
- Right sizing reduces wear on cables, drums and the opener.
What a technician measures
To size a replacement, a technician looks at several things. They consider the door height and width, because these affect the number of coils needed and the length of the spring. They look at the construction of the door: steel, wood, aluminum and glass, insulated or not, any added windows or hardware. They check the drum size, because the diameter of the drum changes how much cable is wound per turn of the shaft.
They measure the old spring where they can, including the wire diameter, the inside diameter and the coil length. These measurements give a strong clue to the spring that was installed. But a spring that was correct for the door when it was built may no longer be correct if the door has changed. Weight added since then, such as new panels or a layer of insulation, may call for a different spring.
In some cases the technician weighs the door, or works out its weight from its size and construction. They then select a spring that will balance that weight at the drum size and height involved. The method is more precise than guessing, and it is one of the main things a trained technician brings to the job.
Why doors change over time
A door does not always stay the same as the day it was installed. Owners add windows, install insulation kits, replace a damaged panel with a heavier one, add a wood overlay for appearance, or repaint with thick coatings. Some doors absorb moisture and become heavier, especially wood doors in a humid climate. Over the years, the weight can drift enough that the original spring is no longer the right match.
Springs also change. As a spring ages and goes through cycles, it can lose strength, so a spring that was correct years ago may now be a little weak. This is part of why a door can feel heavier gradually, and why it may seem out of balance before any part has actually broken.
When you call about a spring problem, mention any changes you have made to the door. Windows, insulation, new panels and repainting all matter. See our guide on garage door insulation and our page on windows and inserts for how these additions change a door.
Sizing and the opener
The opener is not meant to lift the door. It guides a door that is already balanced by the springs. If the springs are the wrong size, the opener is forced to compensate. A weak spring makes the motor work harder on the way up and can cause the force setting to be turned up, which in turn can make the safety reversal less sensitive. A strong spring can make the door rise too fast and cause the opener limits to behave strangely.
Many owners blame the opener when the real problem is balance. A door that is difficult to move by hand, or that will not stay open halfway, is telling you that the spring system is off. Replacing the opener will not solve that.
A good technician checks balance first when called about a struggling opener. Our guides on opener limit and force settings and opener motor failure explain what else can be involved, and why balance is always the first thing to confirm.
The risks of the wrong spring
Choosing the wrong spring is not just a nuisance. A spring that is too strong can cause the door to rise rapidly or to bounce, which can damage the track, the cables and the opener. If the cables go slack, they can jump off the drums, and the door can become crooked or stuck. A spring that is too weak leaves the door heavy and prone to falling, which can injure people or damage vehicles.
Under strain, a mismatched spring may also break sooner. If a spring has to work beyond its design, it may fatigue sooner. A spring that is stretched or wound beyond its intended range is also more dangerous when it fails.
These risks are another reason we do not recommend owners buy and install springs themselves. Parts are sold online with limited guidance on sizing, and a wrong choice may not be noticed until the door is already in use. The right approach is to have the door measured and the spring selected by a person who can see the door.
Single door, double door and heavier builds
Door size is a major factor. Single doors are narrower and lighter and often use a single spring or a pair of smaller ones. Double doors are wider and heavier, and they commonly use two springs on a shaft to share the load. Heavier doors such as insulated steel, wood and doors with large glass panels may need stronger springs, and in some cases a different arrangement with a longer shaft or larger drums.
Tall doors are another variation. A taller door needs a longer lift, which changes the number of turns on the spring and the cable length. High lift setups, which are common in some commercial buildings, are different again. Our guide to single and double garage doors gives more on how size changes the setup.
In all of these cases, the technician works from the real door in front of them. They do not assume, and they do not rely on the label of the old spring alone.
What to tell us when you call
A few details help us prepare. Tell us the width and, if you know it, the height of the door. Tell us whether it is steel, wood, aluminum with glass or fiberglass, and whether it is insulated. Mention any windows or decorative additions. If you remember changes made after the door was installed, such as insulation kits or replaced panels, say so.
If you can see the old spring from a safe distance, tell us whether there are one or two and whether they are on a shaft above the door or along the sides. A photo taken from the floor can help. Do not go near or under the door to get it.
The technician takes the final measurements on site, and quotes are given by phone for simple jobs, with the service call charge explained before dispatch. If you want to talk through what you have, call and describe the door and what it is doing.
Material and construction differences
The material of the door is one of the biggest drivers of weight. A thin single layer steel door is among the lightest options. Adding an insulating layer and a second steel skin makes it heavier. Wood doors can be heavy, and their weight can vary as they take on moisture during the rainy season. Aluminum frame doors with full view glass can be lighter or heavier depending on the glass thickness, and impact rated glass is heavier than ordinary glass.
Fiberglass and composite doors sit in between, with weights that depend on the core and the surface. Because there is so much variation, no table can tell you the right spring from the door type alone. The technician has to look at the actual door.
If you are considering a new door, ask about its weight and the spring setup that comes with it. Our guide to choosing a new garage door describes the options, and impact rated garage doors explains why wind rated doors, which are common in South Florida, tend to be heavier and need springs chosen with that in mind.
Why a service visit beats an online order
Springs are easy to find online, and the listings often give a size and a price. The trouble is that the listing does not know your door. A buyer who orders a spring based on a label, or on a measurement taken from a broken piece, may end up with a part that does not balance the door. Returning a spring after it has been installed is not simple, and an unbalanced door can damage the opener and cables before the problem is noticed.
A technician who measures the real door, weighs it if needed, and chooses the spring brings the problem and the solution together. They can also correct related issues, such as worn cables, tired bearings or a drum that has shifted, which a part ordered online would not address.
Most of all, the installation involves tension that only a trained person should handle. Getting the right part is only half the job. If you would like to know what a visit involves, read how spring replacement works, and then call when you are ready to talk about your own door.
Questions people ask
Can I use the same spring as the old one?
Often the old spring is a good starting point, but it should be confirmed. The door may have changed since it was installed, and old springs lose strength with use. A technician measures the spring and the door and chooses a replacement that balances the door as it is today.
What happens if the spring is too strong?
The door may rise on its own, bounce, or shoot up with the opener. Cables can go slack at the bottom and slip off the drums, which can leave the door crooked or stuck. It also strains the track and opener. A balanced door that stays put halfway is the goal.
What happens if the spring is too weak?
The door feels heavy and tends to fall when released partway. The opener works harder, and cables and drums wear faster. It is also less safe because a door that does not stay up can drop on people or vehicles. A technician can test balance and correct it.
Does adding windows or insulation change the spring I need?
Yes, it can. Added weight may mean the original spring is no longer the right size. Tell the technician about windows, insulation kits, replaced panels or heavy paint. They can allow for the difference when they choose the new spring.
Why is my opener struggling if the spring seems fine?
The opener may be compensating for a weak or unbalanced spring system. You can look from a safe distance, but balance testing and spring work should be done by a technician. Replacing the opener without checking balance usually does not fix the problem, so have the springs checked first.
How do I get the right spring quoted?
Call and describe the door: width, material, insulation, windows and what the old spring looked like. We give quotes by phone for straightforward jobs and explain the service call charge before dispatch. The technician confirms the size on site by measuring the door and spring, so the part fits the door.
Dealing with "Sizing Springs to Door Weight"? Tell us the door type, the noise or the failure, and what you tried. We will say what the job probably involves and whether it needs a technician on site.
Related pages
The measurements behind a correct spring choice
When a technician sits down to size a spring, a handful of careful measurements drive the decision. The door height and width are noted, and the wire size is measured with a gauge instead of being estimated by eye. For torsion springs, the inside diameter and the length of the coil are recorded as well. These numbers, combined with the actual weight of the door, narrow the choices to a spring that can carry the load through the full travel of the door. Keeping the measurements in a note on your phone makes it easy to share them later, whether you are describing the door for a repair or comparing it with a new one.
Weighing a door is not as simple as it sounds, because the door is partly held up by its own springs and track at all times. A common method is to measure the load using a scale at the bottom edge while the door is in a controlled position, then use that reading to confirm the spring rating. The crew takes care here because the door can move unexpectedly if the balance is wrong. A technician will often repeat the measurements on site, because paper numbers and real doors do not always agree, particularly on older homes where the opening has shifted slightly with the years.
You can help by finding any labels or stickers on the door, the track or the old spring, and by taking a photo of them before we arrive. Even a partly faded sticker gives clues about the original design. Please do not try to remove or loosen a spring to read its markings. The tension can release suddenly, so let the technician handle that step. If the old spring has a colored paint mark or a tag, photograph it where it sits and leave the rest alone, since the markings can tell the team a good deal about the original design.
Why two doors that look the same may need different springs
Two garage doors of the same width and height can weigh noticeably different amounts. One may be a plain steel panel with no insulation, and the other may have a foam core, a wood overlay or a row of glass windows. The extra material changes the load, and the springs have to be sized to match. This is why we ask about the construction of your door when you call instead of relying on the dimensions alone. Ask the crew what weight and size they used when they selected the spring, and make a note of it in your records for the next time the door needs service.
Track layout and drum or pulley setup also influence which spring works best. A low headroom installation, for example, uses a different lift arrangement than a standard one, and that changes how the force is delivered along the track. A spring that works perfectly in one layout might leave the door feeling heavy or springy in another. It also helps to mention any reinforcing bars, extra hardware or heavy decorative additions on the door, since each one adds load that the spring has to carry from the bottom of the opening to the top.
The practical lesson for owners is to let a trained person confirm the match on site. A spring ordered from a picture or a rough size guess can arrive close but not right, leaving you with a door that rises unevenly or an opener that labors. The technician explains what is being installed and why, and any quote and scope are discussed before work starts. Trying to compare the door against a neighbor's is rarely useful, because even the same model can leave the factory with different options and later modifications that shift its weight.
