Why garage doors need careful attention in a family home
A garage door is easy to forget as a hazard because it is part of the daily routine. It opens, the car drives in, it closes. But a typical door is a big, heavy object that moves with enough force to injure a child or a small animal. It also has several places where fingers, hands and paws can be caught or crushed, and it is controlled by buttons and remotes that children find fascinating.
In many South Florida homes the garage is more than a parking space. It is the main entrance, the laundry room, the place where bicycles, scooters, pool toys and storm supplies live, and sometimes where children play out of the sun and rain. That means children are in and out of the space all the time, often near the door. The more a family uses the garage, the more important it is to handle the risks in a calm and systematic way.
The aim here is not to frighten anyone. A modern door with working safety devices is designed to reverse or stop when it meets an obstruction. Most of the risk comes from devices that no longer work, from remotes in the wrong hands and from habits such as running under a closing door. The sections below describe the main hazards and what a family can do about each.
The pinch points on a door
The most dangerous spots on a sectional door are the joints between the panels and the hinges. As the door moves, the gap at each joint opens and closes, and a finger or hand placed there can be crushed. Children often grab the door edge or put their hands on the panels as it comes down. The same risk exists at the sides, where the door runs close to the track and the frame.
The bottom edge is another hazard. A door that closes onto a hand, foot or paw can cause injuries, and a door that is poorly adjusted or has a failed reversing system can press down with considerable force. Pets that sleep under the edge of a partly open door, or chase a ball under a closing door, are at risk too.
Then there are the parts above and beside the door: springs, cables, drums and brackets. These are under heavy tension. A child who pulls on a cable or plays with a spring can cause a sudden, violent release. These parts should be out of reach, and children should be taught from an early age that they are never to be touched. If any part is within a child's reach, for example a low cable or a loose spring cover, tell a technician so it can be assessed.
- Panel joints and hinges: fingers can be crushed as sections fold.
- Bottom edge: hands, feet and paws can be caught.
- Track sides: hands can be pinched between the door and the frame.
- Springs, cables and brackets: heavy tension, never to be touched.
- Opener rail and chain: moving parts above the vehicle space.
How the safety sensors protect a child
Every modern residential opener is required to have an entrapment protection system, and it is the most important safety feature of the door. The typical arrangement is a pair of photo-eye sensors mounted a few inches above the floor on either side of the door. One sends an invisible beam and the other receives it. If something breaks the beam while the door is closing, the door stops and reverses.
The beam is low to the floor so that it can detect a small child or a pet, but it only works if the sensors are clean, aligned and connected. A sensor knocked out of line by a bicycle, a vacuum cleaner or a stack of boxes may fail to detect an obstruction, or may stop the door from closing at all. Some owners respond to the second symptom by bypassing the sensor or holding down the close button. That removes the protection, and it is a real danger to a child.
Direct sun can also interfere. In South Florida, low morning or late afternoon sun shining into a sensor lens can wash out the beam and cause false triggers or failures. If your door reverses for no obvious reason at certain times of day, or refuses to close in bright light, note it and call. Our page on sensor alignment explains how technicians correct it, and sensor repair covers replacement.
The second safety system: reversing on contact
In addition to the photo-eye sensors, openers have a sensing function that detects resistance while the door is closing. If the door touches something solid, the opener senses the extra load and reverses. This is the backup for cases where the beam is not broken, such as a child lying across the threshold with their body below the beam line, or a bicycle wheel standing in the opening.
This system depends on correct force and limit settings. If the force has been turned up to make a heavy door move, the door may press too hard before reversing. If the limit is wrong, the door might not close fully or might hit the floor too hard. Both are signs of an underlying problem such as worn springs, a binding track or a loose setting, and the answer is a technician's adjustment, not a bigger force setting.
Families can test the contact reversal in a cautious way. Lay a sturdy, flat object such as a board in the path of the closing door, start the door and see whether it reverses on contact. If it does not, or if it crushes the object, stop using the door and call. Never test with a person, a pet or a delicate item, and keep your hands clear. Our home safety checklist describes the other checks you can do safely.
Remotes, wall buttons and keypads
A remote control looks like a toy and acts like a switch for a heavy machine. Children love to press buttons. A child who plays with a remote in the car or inside the house may open or close the door without understanding that someone could be in the way. Keep remotes out of reach, in a place children cannot get to, and do not let a small child carry one as a plaything.
The wall button should be mounted high enough that young children cannot reach it. A common guideline is at least five feet from the floor, and out of reach of the door itself so that a person using it can see the door clearly. Many wall controls have a lock function that disables the remotes, which can be helpful when you are away or when children are home alone. Check how yours works.
Keypads outside the door are another consideration. Choose a personal number that is not obvious, and change it if it is shared widely. If a remote is lost or a former tenant or contractor still has access, ask a technician about reprogramming the opener so the old devices stop working. Our page on remote programming describes how this is done in general terms.
Pets and the garage door
Pets share the same risks as children, with some differences. Cats and small dogs can slip under a door as it closes, and they are drawn to shaded, cool spots in the heat of the day. A cat that curls up under a partly open door can be injured if the door is closed without a check. A dog that bolts through the opening after a squirrel may run into the door as it moves.
Make a habit of looking before you close the door, and do not leave the garage unattended with the door moving. If a pet likes to sleep in the garage, provide a bed away from the door path. If a pet door is installed in or near the garage door, make sure it does not hold the door open or block the sensor beam.
Remember, too, that the garage is a place where chemicals, tools and vehicles are stored, and the door adds another danger. In hurricane season, if you shelter pets or keep them inside during storms, keep them away from the garage entirely. A door under wind load can behave in ways a family does not expect, and a pet in the way is at greater risk.
Rules for a household with children
Safety devices help, but family habits matter more. A short list of simple rules, taught early and repeated, protects children better than any device. The rules should be easy to remember and enforced consistently by every adult in the home.
Children should never run under a moving door, play with the wall button or remote, hang from the door or climb on it. They should understand that the door can hurt them even if it looks slow. Teach them to stay back and to wait until the door has finished moving before walking through. Keep toys, bikes and scooters out of the door's path, because a toy in the beam line can trigger the sensors or, worse, be a reason to dash back under a closing door.
Adults should model the same behavior. Watch the door close before leaving, particularly if children or pets are nearby, and do not use the remote from the street while the door is moving. If a child has been left alone in the house, make sure they know what to do if the door gets stuck or the opener fails, which is to stay clear and call an adult. If someone is hurt or trapped, call 911 first.
- Never run, play or stand under a moving door.
- Keep remotes and keypad numbers away from small children.
- Mount the wall button out of a child's reach.
- Keep toys and bikes clear of the door path and sensor beam.
- Watch the door until it has finished moving.
- Do not touch springs, cables or brackets, ever.
Storms, power cuts and the family garage
South Florida families face a seasonal complication. During a storm or a power cut, the garage door may stop responding to the wall button and remotes, and adults may reach for the manual release to get a car out or to close the door. In the dark, in a hurry and with children around, that is when mistakes happen. A door released from the opener is a heavy object held only by springs and cables, and if those are worn it can drop quickly.
Decide ahead of time who in the household may use the release and under what conditions. Our guide to using the manual release safely describes when it is reasonable. Children should never pull the release cord. Make sure the cord is out of reach of small hands and of the car's roof rack, door handles and mirrors, which sometimes catch it and pull the door loose by accident.
A battery backup, if the opener has one, can keep the door working for a limited time in an outage. Check the status light occasionally and know what the unit does. After a storm, look at the door before letting children play near it. Wind and flying debris can bend tracks and loosen hardware, and a door that looks fine may be a hazard. If anything looks off, keep the area clear and call.
Also consider where the family waits out a storm. The garage is rarely the safest room, and a door under wind load is not a place for children or pets. Keep everyone away from it until the weather has passed and the door has been looked at.
A scenario: the sensor that stopped seeing
Think of a family in a Miramar neighborhood with two small children and a dog. For several days the garage door has refused to close in the late afternoon. It starts down, then goes back up, and the opener light blinks. After a few frustrating evenings, one parent decides to hold the wall button down so the door keeps moving, which works, but only while someone holds it.
That workaround is exactly what the safety system is meant to prevent, because the person pressing the button is standing next to the door, not watching the sensor line, and a child or the dog could be in the way. The real problem turned out to be low sun shining straight into one sensor lens at that hour, plus a bracket that had been nudged by a bicycle. A technician aligned the bracket, adjusted the sensor angle and shaded the lens, and the door closed normally in any light.
The lesson is that a door that misbehaves for a reason is giving the family useful information. Hold-to-close modes and bypassed sensors hide the problem and remove protection. Call early, describe the time of day and what the opener light does, and let a technician fix the cause.
Warning signs that call for action
A door that is no longer protecting a household usually gives signs. It may close without reversing when something is in the way, which suggests that the sensors or the force settings are faulty. It may reverse when nothing is there, which may be dirty or misaligned sensors. It may be crooked, noisy or jerky, which can point to springs, cables or tracks needing attention. It may start to move by itself or respond to remotes unexpectedly, which can point to wiring, interference or a failing circuit board.
If you see any of these, reduce use of the door and keep children and pets away from it. Do not bypass the sensors or hold the close button to force the door down. Do not try to adjust the springs or cables. A technician can examine the door, check the sensors and the reversal function and make adjustments safely. If the door has become a risk, do not leave it where children can reach it while it is out of order.
Our guide on warning signs lists other changes worth taking seriously. If anyone has been hurt by the door, call emergency services before anything else. After that, call us to make the door safe.
Getting a technician to check the safety features
A professional check of the safety features is a sensible step for any family, and particularly for a home with a door that has been installed for some time or an opener that has not been looked at in years. A technician will test the sensors, the reversal function, the balance, the springs, the cables and the hardware, and explain what they find.
When you call, mention that you have children or pets and that you want the safety devices checked. Describe anything you have noticed, such as a door that sometimes reverses or a sensor light that blinks. The dispatcher will explain the service call charge on the phone before anyone is sent, and quotes for clear repairs are given by phone. We do not promise arrival windows, because timing depends on the day and other calls.
If you want your garage door looked at for safety, call and tell us what you have seen. We will walk through the symptoms and explain what a visit involves.
Questions people ask
How do the photo-eye sensors protect a child?
They send an invisible beam a few inches above the floor across the door opening. If anything breaks the beam while the door is closing, the door stops and reverses. They only work if they are clean, aligned and connected, so a sensor that has been knocked or covered should be checked by a technician, not bypassed.
How high should the wall button be mounted?
High enough that young children cannot reach it, a commonly given guideline being at least five feet from the floor, and placed where the person using it can see the door clearly. Many wall controls also have a lock feature that disables remotes. A technician can move or replace the control if yours is too low.
My door closes on a broom handle without reversing. What does that mean?
It suggests the reversal function is not working properly, possibly because of force or limit settings, a sensor fault or a mechanical problem. Do not keep using the door with children or pets around. Stop and call so a technician can test and correct the safety features.
Can I bypass a sensor that keeps stopping the door?
No. Bypassing a sensor removes the protection that stops the door from closing on a child or pet. A sensor that interrupts the door is telling you about misalignment, dirt, wiring or a failing part. A technician can find the cause and correct it safely.
Is it safe for a child to use the remote?
Young children should not operate the door unsupervised. A remote can start a heavy door without the child seeing who is in the way. Keep remotes out of small children's reach, teach older children the rules and make sure an adult watches the door while it moves.
What should I do if my child or pet is hurt by the door?
Call 911 for a person, or a veterinary emergency service for an animal, before anything else. Do not force or lift a damaged door if it might drop again. Keep others clear. After the emergency, call us so a technician can make the door safe before it is used again.
Dealing with "Child and Pet Garage Door Safety"? Tell us the door type, the noise or the failure, and what you tried. We will say what the job probably involves and whether it needs a technician on site.
